- Home > Products > PVDF > PVDF for Lithium Batteries >
Zheflon® FL2001 PVDF- Lithium battery Binders Grade
CategoriesZheflon® FL2001 PVDF- Lithium battery Binders Grade
Categories PVDF for Lithium Batteries Album View larger image Brand Flurine Model FL2001 Features Modified polymer, medium viscosity Uses Lithium battery binders Forms White powder Update Time 2021-02-26 Detail InformationZheflon® FL2001 is a medium-viscosity polyvinylidene fluoride modified polymer that enhances the interaction between polymer molecules, active materials and metal plates, also improves the adhesion performance and corrosion resistance in the electrolyte, which especially suitable for Lithium cobaltate and lithium iron phosphate, that can effectively increase the bending resistance of pole pieces.
Zheflon® FL2001 can effectively reduce the amount of formula, reduce the DC resistance of the battery, improve the energy density and charge-discharge performance of the battery, effectively increase the capacity retention rate of the battery during the cycle, and thus meet the needs of the automotive industry.
General
Features
Modified polymer, medium viscosity
Uses
Lithium battery binders
Forms
White powder
Items
Typical Value
Test Method
FL2001
Physical Properties
Density(g/cc)
1.77~1.79
ASTM D792
Particle size(μm)(D50)
≤110
ISO 22412
Water Absorption(%)(Time 24 hr)
≤0.10
ISO 62
Dissolution properties
Rotational viscosity(cps)
8,000-13,000
1gPVDF:10gNMP,#3spindle,25℃
Molecular properties
Molecular weight(Da)
1,000,000~1,300,000
GPC,DMF,ISO 16014
Intrinsic viscosity(dl/g)
3.0~3.5
30℃,DMAC
Molecular weight distribution
2.0-3.0
GPC,DMF,ISO 16014
Thermal Properties
Melting Point(℃)
165~170
ASTM D3418
Crystallization Temperature(DSC peak)(℃)
130~140
ASTM D3418
Glass Transition Temp, Tg(℃)
-40.0
ASTM E1356
Decomposition Temperature(℃)
360
1% wt. loss / in air
Crystallization Heat(J/g)
36.0~45.0
ASTM D3417
Heat of Fusion(J/g)
40.0~50.0
ASTM D3417
Electrical Properties
Surface Resistance(ohm)
≥1.00E+14
Voltage<1V
After 2 min—500V
ASTM D257
Electrical Resistivity(ohm·cm)
≥1.00E+14
Intensity=10mA
After 2 min@23℃
ASTM D257
1.PVDF should be processed under 260℃,to avoid producing toxic gases;2.PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds;3.Operators should take good care of personal protection during the use procedure and processing.PVDF is packed in PE plastic bag and then be put into a drum with the net weight 25KGS. It must be stored in clean, cool, dry place.
Please send your message to usCONTACT US TO GET DETAILED PRODUCT SPECIFICATIONS
- Contact us
Contact Person- leave a message:
- Contact Now
- Address:
- No.5, Weiyi Road, Shangyu Hangzhou Gulf Chemical Industrial Zone, Zhejiang, China 312369
subscriptionMobile pageCopyright © 2021 Zhejiang Fluorine Chemical New Materials Co., Ltd Support By BEE Cloud